LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Body Panel System - Front End Body Panels -- Range Rover Velar/L560) >> Front End Body Panels >> Removal And Installation >> Cowl Panel (G2056049) >> Installation

Cowl Panel (G2056049): Installation

WARNING: This page is about a different car, the 2019 Land Rover Range Rover Velar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 2 heated windshield washer jets.
    • Install the heated windshield washer jet hose.
    • Secure the washer hose.
  3. Connect the 2 electrical connectors.
  4. Install the cowl panel.
  5. Secure the washer hose.
  6. Install the 2 foam pads.
  7. Install the 2 access covers.
  8. Connect the windshield washer hoses.
  9. Install the seal.
  10. Install both windshield wiper arms.

    Refer to: WINDSHIELD WIPER PIVOT ARM

scientia non olet · About LEMON Manuals