LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System - General Information -- Range Rover Velar/L560 >> Fuel System - General Information >> General Procedures >> High-Pressure Fuel System Bleeding (G2134830)

High-Pressure Fuel System Bleeding (G2134830)

19.50.24 FUEL SYSTEM BLEED - HIGH PRESSURE ALL DERIVATIVES 0.10
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Before working on the fuel system make sure to study the fuel system health and safety article. For additional information, Refer to: DIESEL FUEL SYSTEM HEALTH AND SAFETY PRECAUTIONS /PETROL AND PETROL-ETHANOL FUEL SYSTEMS HEALTH AND SAFETY PRECAUTIONS
  2. Set the ignition to the ON position.
  3. CAUTION: Do not crank the engine for more than 20 seconds.

    Start the engine.

  4. NOTE: If the engine does not start, wait for 5 seconds and repeat step 2.

    Set the ignition to the OFF position.

scientia non olet · About LEMON Manuals