LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2018 >> Range Rover Velar Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- Range Rover Velar/L560 >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Removal And Installation >> Engine Coolant Degas Separator (G2046485) >> Installation

Engine Coolant Degas Separator (G2046485): Installation

  1. Install the coolant degas separator.

    Torque  : 12 Nm 

  2. Connect the 2 lower coolant hoses.
  3. CAUTION: Inspect the seals and renew the components if damaged or worn.

    Connect the 3 upper coolant hoses.

  4. Fill the engine coolant system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING 

scientia non olet · About LEMON Manuals