Instrument Cluster Lens (G2131327): Installation
-
NOTE: Make sure that do not to leave finger prints inside the new lens during the installation.
- Install the INSTRUMENT CLUSTER (IC) lens.
- Install and tighten the 2 inside screws.
Torque : 0.5 Nm
- Install and tighten the 2 outside screws.
Torque : 1 Nm
-
NOTE:
- Make sure that do not to leave finger prints inside the new lens during the installation.
- If equipped.
Install the INSTRUMENT CLUSTER (IC) lens.
- Install the INSTRUMENT CLUSTER (IC).
Refer to: INSTRUMENT CLUSTER