LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2017 >> Range Rover Autobiography >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake & Actuation -- Range Rover/L405 >> Parking Brake And Actuation >> Electric Park Brake Service Mode Activation And Deactivation >> General Procedures >> Deactivation

General Procedures: Deactivation

CAUTION:
  • This procedure requires the vehicle in the Park or Neutral position, with the ignition turned ON (the engine must be OFF) and the parking brake system in Service Mode.
  • Once the rear brake pads or brake discs have been installed, the Service Mode must be cancelled.
  1. Press and hold the parking brake switch in the apply position.
  2. Wait 2 seconds.
  3. Press and hold the accelerator pedal in the wide open throttle position.
  4. Wait 2 seconds.
  5. Turn the ignition Off and back On immediately.
    NOTE: An audible noise will be heard to confirm that the parking brake has been released from the Service Mode.
  6. Release the accelerator pedal and release the parking brake switch to the neutral position.
scientia non olet · About LEMON Manuals