Pinpoint Test F: Front Door Window Bounce Back
- F1: CHECK WINDOW MOTOR INITIALIZATION
- Initialize the door window motor.
Refer to: DOOR WINDOW MOTOR INITIALIZATION .
Did the initialization work?
- Yes : Test the system for normal operation
- No : GO to F2.
- F2: CHECK THAT THE DOOR WINDOW SEAL IS FREE FROM FOREIGN MATERIAL
- Check for any foreign material or obstruction in the door window seal
Is the door window seal free from foreign material?
- Yes : GO to F3.
- No : Remove any foreign material from door window seal and lubricate the seal. Test the system for normal operation.
- F3: CHECK THAT THE DOOR WINDOW SEAL IS INSTALLED CORRECTLY
- Check that the door window seal is installed correctly
Is the door window seal installed correctly?
- Yes : GO to F4.
- No : Install the door window seal correctly. Test the system for normal operation
- F4: CHECK THAT THE DOOR WINDOW SEAL IS NOT WORN IN THE CHANNELS
- Visually check that the door window seal is not worn in the door channels
Is the door window seal worn in the channels?
- Yes : Install a new door window seal as necessary. Test the system for normal operation
- No : GO to F5.
- F5: CHECK THE DOOR WINDOW IS SECURE
- Remove the door window outer waist seal
- Check if the door window installed correctly and secured to the door window regulator
Is the door window correctly installed and secure?
- Yes : Test the system for normal operation
- No : Adjust the door window referring to the door window setting procedure in this procedure. Test the system for normal operation. If the concern persists, install a new door window regulator as necessary. Refer to: FRONT DOOR WINDOW REGULATOR MOTOR (Removal and Installation), REAR DOOR WINDOW REGULATOR MOTOR - STANDARD WHEEL BASE (Removal and Installation), REAR DOOR WINDOW REGULATOR MOTOR - LONG WHEELBASE (Removal and Installation).