Pinpoint Test C: Window(S) Inoperative (Motor Noise Can Be Heard)

1. Remove the door window outer waist seal
2. Check if the door window installed correctly and secured to the door window regulator

Is the door window correctly installed and secure?

1. Yes  : GO to  C2.
2. No  : Install a new door window as necessary. Refer to: FRONT DOOR WINDOW GLASS  (Removal and Installation), REAR DOOR WINDOW GLASS - STANDARD WHEEL BASE  (Removal and Installation), REAR DOOR WINDOW GLASS - LONG WHEELBASE  (Removal and Installation).

1. Visually inspect the cables, rollers and rail sliders for foreign material

Are the cables, rollers and rail sliders free from foreign material?

1. Yes  : GO to  C3.
2. No  : Remove any foreign material. Test the system for normal operation. If the concern persists, install a new door window regulator as necessary. Refer to: FRONT DOOR WINDOW REGULATOR MOTOR  (Removal and Installation), REAR DOOR WINDOW REGULATOR MOTOR - STANDARD WHEEL BASE  (Removal and Installation), REAR DOOR WINDOW REGULATOR MOTOR - LONG WHEELBASE  (Removal and Installation).

1. Check for any foreign material or obstruction in the door window seal

Is the door window seal free from foreign material?

1. Yes  : GO to  C4.
2. No  : Remove any foreign material from door window seal and lubricate the seal. Test the system for normal operation

1. Check that the door window seal is installed correctly

Is the door window seal installed correctly?

1. Yes  : GO to  C5.
2. No  : Install the door window seal correctly. Test the system for normal operation

1. Visually check that the door window seal is not worn in the door channels

Is the door window seal worn in the channels?

1. Yes  : Install a new door window seal as necessary. Test the system for normal operation
2. No  : Adjust the door window referring to the door setting procedure in this procedure