LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2017 >> Discovery Sport SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission/Transaxle -- Discovery Sport/L550) >> Automatic Transmission/Transaxle >> Diagnostics - Vehicles With: 9HP48 9-Speed Automatic Transmission - AWD >> Diagnosis And Testing >> Routines >> Transmission Control Module Functionality Verification

Transmission Control Module Functionality Verification

WARNING: This page is about a different car, the 2018 Land Rover Discovery Sport. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: The Transmission Control Module Functionality Verification routine requires one person to drive the vehicle and another person to monitor the progress of the routine. Failure to follow this instruction may result in personal injury.

The Transmission Control Module Functionality Verification routine is used to verify the function of the transmission during a road test.

The Transmission Control Module Functionality Verification routine should be performed after installing a new valve block.

After completing the road test, check the transmission control module for DTCs and perform the relevant corrective actions.

scientia non olet · About LEMON Manuals