LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2017 >> Discovery Sport SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission/Transaxle -- Discovery Sport/L550) >> Automatic Transmission/Transaxle >> Diagnostics - Vehicles With: 9HP48 9-Speed Automatic Transmission - AWD >> Diagnosis And Testing >> Routines >> Configure New Module - Transmission Control Module - Without Transmission Replacement

Configure New Module - Transmission Control Module - Without Transmission Replacement

WARNING: This page is about a different car, the 2018 Land Rover Discovery Sport. However, it is still accessible from the selected car via links, so may be relevant.

The Configure New Module (Without Transmission Replacement) routine is used to configure a new transmission control module with the latest level software and to store the vehicle identification number. This Configure New Module routine must be performed after installing a new transmission control module to the existing automatic transmission. After performing the Configure New Module routine, the Transmission Control Module Adaption routine must be performed.

scientia non olet · About LEMON Manuals