LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2017 >> Discovery Sport SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission/Transaxle -- Discovery Sport/L550) >> Automatic Transmission/Transaxle >> Diagnostics - Vehicles With: 9HP48 9-Speed Automatic Transmission - AWD >> Diagnosis And Testing >> Routines >> Configure New Module - Transmission Control Module - Including Transmission Replacement

Configure New Module - Transmission Control Module - Including Transmission Replacement

WARNING: This page is about a different car, the 2018 Land Rover Discovery Sport. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: A new automatic transmission is supplied complete with a new transmission control module.

The Configure New Module (Including Transmission Replacement) routine is used to configure a new transmission control module with the latest level software and to store the vehicle identification number. This Configure New Module routine must be performed after installing a new transmission control module and automatic transmission. After performing the Configure New Module routine, the Transmission Control Module Adaption routine must be performed.

scientia non olet · About LEMON Manuals