LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2017 >> Discovery Sport SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission/Transaxle -- Discovery Sport/L550) >> Automatic Transmission/Transaxle >> Diagnostics - Vehicles With: 9HP48 9-Speed Automatic Transmission - AWD >> Diagnosis And Testing >> Routines >> Configure Existing Module - Transmission Control Module

Configure Existing Module - Transmission Control Module

WARNING: This page is about a different car, the 2018 Land Rover Discovery Sport. However, it is still accessible from the selected car via links, so may be relevant.

The Configure Existing Module routine is used to re-configure the transmission control module with the latest level software. The adaption counters will be reset to zero but the existing adaptions will be retained. After performing the Configure Existing Module routine, it is not necessary to perform the Transmission Control Module Adaption routine.

scientia non olet · About LEMON Manuals