LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2017 >> Discovery Sport SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Automatic Transmission/Transaxle -- Discovery Sport/L550) >> Automatic Transmission/Transaxle >> Diagnostics - Vehicles With: 9HP48 9-Speed Automatic Transmission - AWD >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test D: Transmission Control Module Adaption Routine

Pinpoint Test D: Transmission Control Module Adaption Routine

WARNING: This page is about a different car, the 2018 Land Rover Discovery Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. D1: TRANSMISSION CONTROL MODULE ADAPTION ROUTINE 
    WARNING: The Transmission Control Module Adaption routine requires one person to drive the vehicle and another person to monitor the progress of the routine. Failure to follow this instruction may result in personal injury.
    NOTE: For further information, refer to the portion above entitled 'Transmission Control Module Adaption'.
    1. Using the Jaguar Land Rover approved diagnostic equipment, perform routine - Transmission Control Module Adaption.

      Did the Transmission Control Module Adaption routine complete successfully (all adaption values equal to or greater than 3)?

      • Yes: Repair complete.
      • No: Repair complete. Customer explanation: Explain to the customer that the Transmission adaption process is an expected behavior and will adapt during normal customer driving over a period of time. This is the same condition in which new vehicle are sold and handed over to customers. There is no specific time frame for the adaption process to be complete and may change due to the customer driving conditions and environment conditions.
scientia non olet · About LEMON Manuals