| Type |
2.0 litre, Inline 4, turbocharged and intercooled Gasoline engine, direct injection, twin overhead camshaft, 4 valves per cylinder |
| Cylinder arrangement |
Inline 4 |
| Cylinder numbering |
No.1 from Front of the engine |
| Bore - nominal |
87.5 mm (3.44 in) |
| Stroke |
83.1 (3.27 in) |
| Capacity |
1999 cm 3 (121.98 in 3) |
| Firing order |
1 - 3 - 4 - 2 |
| Compression ratio |
10.0:1 |
| Direction of rotation |
Clockwise viewed at FEAD |
| Cylinder head maximum
permitted warp (flatness specification) |
0.2 mm (0.008 in) |
| Cylinder block maximum
permitted warp (flatness specification) |
0.15 mm (0.006 in) |
| Maximum power |
|
| All markets |
176.5 kW (240 psi) @ 5500 RPM |
| Maximum torque |
340 Nm (250 lb-ft) @ 1750 RPM |
| At 2000 revolutions per min |
200-268 kPa/29.01-38.87 lb/in2 |
| Balance shaft to crankshaft clearance : |
|
| Maximum |
0.101 mm |