Draining And Filling
PART(S)
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Step 2 | Rear differential fill plug | 1 |
| Step 3 | Rear differential drain plug | 1 |
-
WARNING: Make sure to support the vehicle with axle stands.CAUTION: Make sure the vehicle is on a flat level surface.
Raise and support the vehicle.
-
NOTE: Discard the differential case filler plug washer.
Make sure the vehicle is level. Remove the rear differential case filler plug.
Renew Part: Rear differential fill plug Quantity: 1 .
-
NOTE: Discard the differential case fluid drain plug washer.
Drain the differential fluid.
Renew Part: Rear differential drain plug Quantity: 1 .
-
CAUTION: Install a new washer.
Install the differential case fluid drain plug.
Torque Specification: 34 Nm
- Fill the rear differential, until a thin bead of fluid runs from the filler hole.
Refer to: SPECIFICATIONS
-
CAUTION: Install a new washer.
Install the differential case fluid filler plug.
Torque Specification: 34 Nm
- Lower the vehicle.