Control Diagram
NOTE:
A =
Hardwired; AM =
High speed CAN chassis systems; AN =
High speed CAN powertrain systems
| ITEM | DESCRIPTION |
|---|---|
| 1 | Active on-demand coupling control module |
| 2 | Terrain Response (TR) switchpack |
| 3 | Gateway Module (GWM) |
| 4 | Engine Control Module (ECM) |
| 5 | Anti-lock Brake System (ABS) control module |
| 6 | Transmission Control Module (TCM) |
| 7 | Electric motor and hydraulic pump assembly |
| 8 | Ground |
| 9 | Fuse 30A - located in Rear Junction Box (RJB) |
| 10 | Ignition relay - located in Central Junction Box (CJB) |
| 11 | Fuse 5A - located in CJB |