Differential Draining And Filling: Part(S)
| STEP | PART NAME | QUANTITY |
|---|---|---|
| Filling Step 1 | Rear differential drain plug | 1 |
| Filling Step 3 | Rear differential fill plug | 1 |
DRAINING
NOTE:
- This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
- This procedure contains illustrations showing certain components removed to provide extra clarity.
- Raise and support the vehicle on a suitable 2 post lift.
Refer to: LIFTING .
Remove and discard the rear differential drain plug.
-
CAUTION: Be prepared to collect escaping fluids.
Remove and discard the rear differential drain plug.
- Allow the rear differential fluid to drain into a suitable container.
FILLING
-
Install the new rear differential drain plug.
Renew Part: Rear differential drain plug Quantity: 1 .
Torque Specification: 34 Nm
- Fill the rear differential with the correct specification of fluid.
Refer to: SPECIFICATIONS .
Install the new rear differential fill plug.
Renew Part: Rear differential fill plug Quantity: 1 .
Torque Specification: 34 Nm