Rear Drive HALFSHAFTS: Specifications
GENERAL SPECIFICATION
| ITEM | SPECIFICATION |
|---|---|
| Type | Fully floating, solid shafts with inner and outer constant velocity joints |
RECOMMENDED LUBRICANT
| ITEM | SPECIFICATION |
|---|---|
| Inboard joint | Use grease supplied with replacement boot kit |
| Outboard joint | Use grease supplied with replacement boot kit |
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT | ||
|---|---|---|---|---|
| Halfshaft nut (1) | ||||
| Stage 1 | 100 | 74 | ||
| Stage 2 | 90° | 90° | ||
| Upper control arm to wheel knuckle nut and bolt (1) | ||||
| Stage 1 | 40 | 30 | ||
| Stage 2 | 180° | 180° | ||
| Integral link to wheel knuckle nut and bolt (1) | ||||
| Stage 1 | 40 | 30 | ||
| Stage 2 | 60° | 60° | ||
| Rear brake caliper slide pin bolts | 28 | 21 | ||
|
||||