Front Disc Brake: Specifications
GENERAL SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| - | 17" Brakes |
| Front disc type | Ventilated |
| Front disc diameter | 325mm (12.8 in) |
| Front disc thickness new | 30mm (1.18 in) |
| Service limit | 28mm (1.10 in) |
| Maximum disc run-out - disc installed | 0.05mm (0.002 in) |
| Pad minimum thickness | 2mm (0.079 in) |
| Piston diameter | 66mm (2.598 in) |
TORQUE SPECIFICATIONS
| DESCRIPTION | NM | LB-FT |
|---|---|---|
| Brake caliper bleed screw | 15 | 11 |
| Brake caliper mounting plate to wheel knuckle M12 bolts* | ||
| Stage 1 | 90 | 66 |
| Stage 2 | 120° | 120° |
| Brake caliper guide pin bolts | 58 | 43 |
| Brake disc Torx screw | 35 | 26 |
| Brake flexible hose to caliper | ||
| Stage 1 | 32 | 24 |
| Stage 2 Wait 30 minutes then check torque. | 32 | 24 |
| Brake pipe union to flexible brake hose | 15 | 11 |