Tread Act - North AMERICAN Specification (NAS) Only
Vehicles supplied to the North American markets must comply with the legislation of the Transport Recall Enhancement, Accountability and Documentation (TREAD) act. Part of the requirement of the TREAD act is for the vehicle to display a label, positioned on the driver's side B-pillar, which defines the recommended tire inflation pressure, seating capacity, and the maximum combined weight of the occupants and cargo the vehicle can safely carry. This label is specific to an individual vehicle and it is installed on the production line.
This label must not be removed from the vehicle. The label information only defines the specification of the vehicle as it came off the production line. It does not include dealer or owner fitted accessory wheels and tires of differing size from the original fitment.
- If tires and wheels of a non-standard size are fitted to the vehicle, the car configuration file must be updated using a Land Rover approved diagnostic system.
- If the label is damaged or removed for body repair, it must be replaced with a new label specific to that vehicle. A new label is requested from Land Rover parts and will be printed specifically for the supplied VIN of the vehicle.