LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Vehicle Dynamic Suspension -- Range Rover/L405 >> Vehicle Dynamic Suspension >> Rear Suspension Height Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. To install, reverse the removal procedure.
  2. CAUTION: Calibration of the air suspension system must be carried out if the suspension height sensor is loosened, removed or replaced.

    Using the Land Rover approved diagnostic system, calibrate the suspension ride height.

    Refer to: RIDE HEIGHT ADJUSTMENTS .

scientia non olet · About LEMON Manuals