Locked at Access Height

Locking the suspension at Access height allows the vehicle to be driven at low speeds with the suspension locked at the access height. This allows the vehicle to be driven in low car parks etc. with increased roof clearance.

When the vehicle is at Access height and travelling less than 35 km/h (22 mph), press down on the raise/lower switch (2), or press the driver's door Access height switch (7), for longer than 1 second. The system lock indicator (5) will illuminate and "SUSPENSION LOCKED AT ACCESS HEIGHT" will be displayed in the message center. To cancel this mode, press up on the raise/lower switch (1) for longer than 1 second or increase the speed to 40 km/h (24 mph).