Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- Circuit reference O_T_CLG1
- The powertrain control module has detected a ground measurement for a period longer than expected or has detected a ground measurement when another value was expected
- Main electric/viscous cooling fan circuit short circuit to ground, open circuit, high resistance
- Main electric/viscous cooling fan ignition powerfeed circuit open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Main electric/viscous cooling fan failure