Possible Causes
WARNING: This page is about a different variant/trim than selected.
NOTE:
Glow plug control module output pin connected to ground
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- TDV8 Circuit reference I_T_GLW2
- Circuit reference O_T_GLW
- Circuit reference I_T_GLW1
- The powertrain control module has detected a ground measurement for a period longer than expected or has detected a ground measurement when another value was expected
- Glow plug circuit short circuit to ground
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Glow plug failure