Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Purpose of the DTC
- Monitoring glow control module internal logic
- Electrical Cause
- Yes
- Mechanical Cause
- No
- Control module cavity
- Circuit reference B_D_LIN
- Monitor Description
- Monitoring glow control module internal logic
- Glow plug control module harness short circuit to power
- Prioritised List of Possible Causes
- The powertrain control module has received an indication about the component that indicates a failure e.g. an intelligent actuator or sensor is indicating an internal fault
- LIN_B circuit and Glow plug control module circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- LIN_B circuit or Glow plug control module failure