Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Purpose of the DTC
- Report reception of invalid vehicle speed data
- Electrical Cause
- Yes
- Mechanical Cause
- No
- Control module cavity
- Circuit reference B_D_FR_BP
- Circuit reference B_D_FR_BM
- Monitor Description
- Vehicle speed signal quality below threshold
- Prioritised List of Possible Causes
- The value of the signal measured by the powertrain control module is not plausible given the operating conditions
- Other vehicle speed related DTCs
- Brake pedal switch adjustment
- Brake pedal switch circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Brake pedal switch failure