Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control module cavity
- Circuit reference O_T_CLG1
- The powertrain control module has detected that the operation of a component is prevented by an obstruction
- Main electric cooling fan unable to move due to obstruction
- Main electric cooling fan circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Engine cooling fan stalling caused by obstruction in fan cowling
- Main electric cooling fan failure