Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: AIR CONDITIONING SYSTEM RECOVERY, EVACUATION AND CHARGING
- Refer to: COOLING FAN
- CAUTION: Make sure that all openings are sealed.
Renew Part: Air conditioning pipes to condenser O-ring seals Quantity: 1 .
Torque Specification: 8 Nm
- CAUTION: Remove and discard the O-ring seals.
Renew Part: Air conditioning pipes to condenser O-ring seals Quantity: 1 .
Torque Specification: 8 Nm
Torque Specification: 15 Nm
-
NOTE: If equipped.
Torque Specification: 7 Nm
-
CAUTION: Always protect the cooling pack elements to prevent accidental damage.
-
CAUTION: Always protect the cooling pack elements to prevent accidental damage.
-
Torque Specification: 4.5 Nm