Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
All vehicles
- Refer to: SPECIFICATIONS
- Refer to: ENGINE UNDERSHIELD
- Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING
- Refer to: COOLANT EXPANSION TANK
Cold climate vehicles
Cold climate vehicles
Torque Specification: 7 Nm
All vehicles
Torque Specification: 8 Nm
Torque Specification: 7 Nm
Torque Specification: 5 Nm
Torque Specification: 7 Nm
Torque Specification: 10 Nm
Torque Specification: 7 Nm
-
CAUTION: Protect the radiator during this operation.NOTE: With assistance remove the component.
- Release both locking tangs.