Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
- Disconnect the battery ground cable.
Refer to: SPECIFICATIONS
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: ENGINE UNDERSHIELD
Torque Specifications:
M10 60 Nm
M6 10 Nm
Torque Specifications:
M8 10 Nm
M6 7 Nm
-
NOTE: If equipped with TSS.
Torque Specification: 10 Nm
-
NOTE: If equipped with TSS.
Torque Specification: 47 Nm
-
NOTE: If equipped with TSS.
Torque Specification: 47 Nm
-
NOTE: Components removed for clarity.
Torque Specification: 47 Nm