Removal And Installation: Installation
WARNING: This page is about a different variant/trim than selected.
- CAUTION: Only tighten the bolts finger-tight at this stage.NOTE: Install a new gasket.
Renew Part: EGR pipe to exhaust manifold gasket Quantity: 1 .
- CAUTION: Install a new clamp. Close the clamp to the first audible click by hand. Making sure that the clamp is in a central position to the joint, close to the second audible click using a suitable tool.
Renew Part: Retaining clips Quantity: 1 .
Torque Specification: 5 Nm
Torque Specification: 10 Nm
- Refer to: ENGINE COVER - TDV6 3.0L DIESEL .