Control Diagram
WARNING: This page is about a different variant/trim than selected.
A = HARDWIRED; AM = HIGH SPEED CAN CHASSIS SYSTEMS BUS; AX = FLEXRAY SYSTEMS BUS
| ITEM | DESCRIPTION |
|---|---|
| 1 | Powertrain Control Module (PCM) |
| 2 | Body Control Module/Gateway Module (BCM/GWM) |
| 3 | Instrument Cluster (IC) |
| 4 | Glow plug (6 off) |
| 5 | Glow plug control module |
| 6 | Fuse - permanent power supply from Auxiliary Junction Box (AJB) |
| 7 | Fuse - power supply from Engine Junction Box (EJB) |
| 8 | PCM Relay - located in EJB |
| 9 | Ground |
| 10 | Fuse - power supply from Engine Junction Box (EJB) |
| 11 | PCM Relay - located in EJB |
| 12 | Fuse - power supply from Auxiliary Junction Box (AJB) |