Fuel Charging And Controls - TDV6 3.0L Diesel: Specifications
WARNING: This page is about a different variant/trim than selected.
NOTE:
A = refer to procedure for the correct torque sequence.
TORQUE SPECIFICATION
| DESCRIPTION | NM | LB-FT | LB-IN |
|---|---|---|---|
| Fuel injection pump cradle bolts | 3 | - | 26 |
| Fuel injection pump retaining bolts | 23 | 16 | - |
| Fuel injection pump bracket | 10 | - | 88 |
| Fuel injection pump sprocket bolt | 50 | 37 | - |
| Fuel injection pump belt rear cover retaining bolts | 10 | - | 88 |
| Camshaft rear end accessory drive (READ) pulley hub retaining bolt | A** | - | - |
| Fuel injection pump belt tensioner retaining bolt | 23 | 16 | - |
| Camshaft READ pulley retaining bolt | A** | - | - |
| Fuel injector retaining bolts | 9 | - | 80 |
| Fuel rail retaining | bolts | 24 | 18 |
| High-pressure fuel line bracket retaining bolts | 10 | - | 88 |
| High-pressure fuel line union nuts | A** | - | - |
| Fuel rail supply tube union nuts | A** | - | - |
| Fuel crossover line union nuts | A** | - | - |
| Crankcase ventilation pipe retain bolts | 10 | - | 88 |
| Intake air shutoff valve retaining nut | 10 | - | 88 |