Removal And Installation: Removal
WARNING: This page is about a different variant/trim than selected.
NOTE:
Removal steps in this procedure may contain installation details.
- Refer to: ENGINE COVER - TDV6 3.0L DIESEL
Torque Specification: 10 Nm
-
NOTE: If equipped.
-
CAUTION: Install a new clamp. Close the clamp to the first audible click by hand. Making sure that the clamp is in a central position to the joint, close to the second audible click using a suitable tool.
Torque Specification: 5 Nm
-
CAUTION: Install the new seals.