LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Electronic Engine Controls - TDV6 3.0L Diesel -- Range Rover/L405) >> Electronic Engine Controls - TDV6 3.0L Diesel >> Post Selective Catalyst Reduction NOX Sensor >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING:

Observe due care when working near a hot exhaust system.

NOTE:

Removal steps in this procedure may contain installation details.

  1. Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: REAR ROCKER PANEL MOULDING - STANDARD WHEEL BASE
  3. CAUTION:

    Left illustration shown, Right is similar.

    G10364325
  4. G11699800

    Torque Specification: 12 Nm 

  5. G00570057

    Torque Specification: 10 Nm 

  6. G00570058
  7. G00570059

    pecial Tool(s): 310-121 

    Torque Specification: 48 Nm 

scientia non olet · About LEMON Manuals