LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Electronic Engine Controls - TDV6 3.0L Diesel -- Range Rover/L405) >> Electronic Engine Controls - TDV6 3.0L Diesel >> Camshaft Position Sensor >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Make sure that the mating faces are clean and free of foreign material.
    NOTE: Only turn the engine in the normal direction of rotation.
    G11608473

    Turn the engine until one of the three webs on the back of the camshaft pulley is visible through the CMP sensor housing.

  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals