LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Oil Pan >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. CAUTION: Installation of the oil pan and tightening must be carried out within 7 minutes of applying the sealant.
    NOTE: Right-hand shown, left-hand similar.
    G11602111

    Apply sealant WSE-M4G323-A5 in an 8mm bead to the cylinder block in the area illustrated.

  2. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals