LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Left Camshaft >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Refer to: SPECIFICATIONS
  2. Refer to: REAR END ACCESSORY DRIVE
  3. Refer to: TIMING COVER 
  4. G11601763

    Install the special tool.

    Special Tool(s): JLR-303-1523 

  5. G11601764

    Install the special tool.

    Special Tool(s): JLR-303-1523 

  6. G11601765

    Using the special tool, remove the rear camshaft pulley retaining bolt.

    Special Tool(s): 303-1145/2 

  7. Remove the special tools.
  8. G11601766
  9. G11601767
  10. G11601768
  11. G11601769

    Install the special tool.

    Special Tool(s): 303-1124 

  12. G11601770
  13. G11601771

    Remove the special tool.

  14. G11601772
  15. G11601773
    • Reposition the secondary timing chain tensioner.
    • Retain the secondary timing chain tensioner plunger.
  16. G11601774

    Remove the camshaft bearing caps evenly.

  17. G11601775
  18. CAUTION: Discard the seals.
    G11601776
  19. G11601777
  20. G11601778
  21. G11601825

    Remove the secondary timing chain from the camshafts.

scientia non olet · About LEMON Manuals