Oil Level Check
WARNING: This page is about a different variant/trim than selected.
The engine oil level can be displayed in the message center on the Instrument Cluster.
For accuracy, oil level checks should be performed with the vehicle on level ground when the oil is hot. The vehicle needs to stand for approximately 10 minutes, after the engine is switched off, to allow the oil to drain back into the sump and the oil level to stabilize. The oil level system will not give a reading until the oil level has stabilized.
The method of checking the oil level can be found in the oil draining and filling procedures. For additional information, refer to: ENGINE OIL DRAINING AND FILLING