Cylinder Head Components
WARNING: This page is about a different variant/trim than selected.
NOTE:
Left cylinder head shown, right cylinder head similar.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Hydraulic lash adjusters (12 off) |
| 2 | Valve spring retainers (12 off) |
| 3 | Rocker arms (12 off) |
| 4 | Valve stem seals (12 off) |
| 5 | Valve guides (12 off) |
| 6 | Exhaust valves (6 off) |
| 7 | Intake valve seats (6 off) |
| 8 | Exhaust valve seats (6 off) |
| 9 | Intake valves (6 off) |
| 10 | Valve springs (12 off) |
| 11 | Bolt |
| 12 | Bracket |
| 13 | Intake manifold |
| 14 | Lifting eye |
| 15 | Washer |
| 16 | Bolt |
| 17 | Bolt |
| 18 | Bolt |
| 19 | Seal |
| 20 | Cap |
| 21 | Intake manifold cover assembly |
| 22 | Washer |
| 23 | Bolt |
| 24 | Lifting eye |
| 25 | Seal |
| 26 | Camshaft bearing caps (7 off) |
| 27 | Bolts (18 off) |
| 28 | Gasket |
| 29 | Camshaft bearing cap and seal housing |
| 30 | Camshaft bearing cap and seal housing |
| 31 | Intake camshaft |
| 32 | Exhaust camshaft |
| 33 | Cylinder head |
| 34 | Cylinder head bolts (8 off) |
| 35 | Exhaust manifold studs (6 off) |
| 36 | Cylinder head gasket |
| 37 | Core plug |
| 38 | Plug |
| 39 | Seal |
| 40 | Oil filler tube |
| 41 | Oil filler cap |
| 42 | Intake manifold |
| 43 | Injectors (3 off) |
| 44 | Bolt (2 off) |
| 45 | Bolt |
| 46 | Vacuum and oil scavenge pump |
| 47 | Water outlet assembly |
| 48 | Bolt (4 off) |