Crankshaft Rear Oil Seal
WARNING: This page is about a different variant/trim than selected.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Housing |
| 2 | Seal |
| 3 | Crankshaft |
| 4 | Rear oil seal retainer |
| 5 | Bolt (10 off) |
The rear main oil seal and retainer assembly is a one-piece unit and is supplied with its own fitting sleeve. The seal and retainer have 2 locating dowels, 10 fixing bolts and a seal. In addition, the retainer has a location for the Crankshaft Position Sensor (CKP). For additional information, refer to: ELECTRONIC ENGINE CONTROLS