LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Crankshaft Pulley - TDV6 3.0L Diesel - Gen 2 >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: TIMING BELT 
  3. G11601805
    • Remove the special tool.
    • Special Tool(s): 303-1117 
  4. G11601916
    • Install the special tool.
    • Special Tool(s): 303-1123 
  5. G11695508
  6. G11695509

    Loosen, but do not fully remove the bolt.

  7. G11695510
    • Install the special tool.
    • Special Tool(s): 303-D121 
  8. CAUTION: Discard the bolt.
    G11695511
scientia non olet · About LEMON Manuals