LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel -- Range Rover/L405) >> Engine - TDV6 3.0L Diesel - Gen 2/TDV6 3.0L Diesel >> Camshaft Front Seal >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different variant/trim than selected.
  1. G11601867

    Special Tool(s): 303-1119 

  2. CAUTION: Make sure the seal is installed correctly.
    NOTE: Make sure that the seal is 1mm below the face of the cylinder head.
    G11601868
  3. G11601869

    Special Tool(s): 303-1119 

  4. G11601772
  5. G11601771

    Special Tool(s): 303-1124 

  6. G11601770

    Torque Specifications: 

    Stage 1: 80 Nm 

    Stage 2: 80° 

  7. G11601769

    Special Tool(s): 303-1124 

  8. CAUTION: Only tighten the bolt finger-tight at this stage.
    G11601768
    CAUTION: Do not use the special tools to lock the camshafts. Failure to follow this instruction may result in damage to the engine or the special tools.
  9. G11695444

    Special Tool(s): 303-1126 

  10. Refer to: TIMING BELT 
  11. Refer to: SPECIFICATIONS
scientia non olet · About LEMON Manuals