Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Purpose of the DTC
- The oil level sensor is not capable to send a recognizable signal to the powertrain control module
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control Module Cavity
- Circuit reference I_T_OCS
- Circuit reference G_G_OCS
- Monitor Description
- The signal sent by the oil level sensor doesn't match the pattern
- Oil level and temperature sensor circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Oil level and temperature sensor failure