DTC P2494-11: Exhaust Gas Recirculation Cooler Bypass Position Sensor Circuit Low Bank 1 - Circuit short to ground: Action
WARNING: This page is about a different variant/trim than selected.
- Refer to the appropriate system wiring diagram and check the exhaust gas recirculation cooler bypass valve solenoid circuit for short circuit to ground
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check and install a new exhaust gas recirculation cooler bypass valve solenoid
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest