Possible Causes
WARNING: This page is about a different variant/trim than selected.
- Electrical Cause
- Yes
- Mechanical Cause
- Yes
- Control Module Cavity
- Circuit reference I_A_PFTS2
- Circuit reference G_R_BTS1
- The powertrain control module has determined failures where some circuit quantity, reported via serial data, is below a specified range
- Exhaust gas temperature sensor - Post DPF circuit short circuit to ground, short circuit to power, open circuit, high resistance
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Exhaust gas temperature sensor - Post DPF failure