LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Supercharged >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - V8 S/C 5.0L Petrol -- Range Rover/L405 >> Engine Cooling - V8 N/A 5.0L Petrol/V8 S/C 5.0L Petrol >> Coolant Pump - V8 S/C 5.0L Petrol >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. NOTE: If the component removed from the vehicle is not as what is detailed in the illustration, make sure the new version of the component is installed (refer to the parts catalogue).
    G11709479
  2. CAUTION: Install new O-ring seals.
    NOTE: Install new gaskets.
    G11601244

    Torque Specification: 12 Nm 

  3. G11709476

    Torque Specification: 48 Nm 

  4. NOTE: If the component removed from the vehicle is not as what is detailed in the illustration, make sure the new version of the component is installed (refer to the parts catalogue).
    G11709482
  5. G11709483
  6. G11601272

    Torque Specification: 10 Nm 

  7. G11709238
  8. G11709237
  9. Refer to: ACCESSORY DRIVE BELT - V8 S/C 5.0L PETROL .
  10. Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .
scientia non olet · About LEMON Manuals