LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2016 >> Range Rover Autobiography >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Rear Suspension -- Range Rover/L405 >> Rear Suspension >> Rear Shock Absorber >> Removal And Installation >> Removal

Removal And Installation: Removal

  1. CAUTION: This step must be carried out in order to maintain the correct compressor/dryer performance.

    Using Land Rover approved diagnostic equipment depressurize the rear air spring.

    Refer to: AIR SUSPENSION SYSTEM DEPRESSURIZE AND PRESSURIZE .

  2. G11692582
  3. G11692583
  4. G11692584
  5. G11692585
  6. G11692586
  7. G11692587
  8. G11692588
  9. Refer to: WHEEL AND TIRE - TDV6 3.0L DIESEL/TDV8 4.4L DIESEL/V6 S/C 3.0L PETROL/V8 N/A 5.0L PETROL/V8 S/C 5.0L PETROL .
  10. G11692591
  11. G11692589
  12. G11692590
  13. G11692592
  14. G11692593
  15. CAUTION: Discard the nuts.
    G11692594
  16. WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

    Raise and support the vehicle.

    Refer to: WHEEL AND TIRE - TDV6 3.0L DIESEL/TDV8 4.4L DIESEL/V6 S/C 3.0L PETROL/V8 N/A 5.0L PETROL/V8 S/C 5.0L PETROL .

  17. CAUTION: Discard the nut and bolt.
    NOTE: Note the orientation of the component prior to removal.
    G11692595
  18. G11692596
    NOTE: Do not disassemble further if the component is removed for access only.
  19. G11692597
  20. G11692598
scientia non olet · About LEMON Manuals