Rear Disc Brake: Specifications
SPECIFICATIONS
| Item | Specification |
|---|---|
| Disc type | Ventilated |
| Disc diameter: | |
| Vehicles with Standard brakes | 350 mm (13.8 in) |
| Vehicles with High Performance brakes | 365 mm (14.4 in) |
| Disc thickness: | |
| New | 25.0 mm (0.98 in) |
| Service limit | marked on the disc |
| Maximum disc run-out | 0.070 mm (0.003 in) with wheel fitted |
| Caliper type | Sliding pin, single piston |
| Piston diameter | 43.0 mm (1.7 in) |
| Pad minimum thickness | 3.0 mm (0.12 in) |
| Brake pad wear warning lead: | |
| Location | Rear right hand brake pad |
| Activates at | 75% of pad life utilized |
TORQUE SPECIFICATION
| DESCRIPTION | NM | LB-FT | ||
|---|---|---|---|---|
| Brake caliper bleed screw | 11 | 8 | ||
| Brake hose union | 40 | 29 | ||
| Brake disc retaining bolt | 35 | 26 | ||
| (1) Brake caliper anchor plate to hub bolts: | 110 + 120° | 81 + 120° | ||
| Brake caliper housing to anchor plate bolts | 35 | 26 | ||
|
||||