LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- Range Rover/L405 >> Hydraulic Brake Actuation >> Brake Master Cylinder - LHD >> Removal And Installation >> Installation

Removal And Installation: Installation

  1. WARNING: Make sure that new nuts are installed.
    NOTE:
    • Install a new O-ring seal.
    • Remove and discard the blanking caps.
    • Make sure that the seal is correctly positioned. Failure to follow this instruction may result in damage to the vehicle.

    To install, reverse the removal procedure.

  2. Refer to: BRAKE SYSTEM BLEEDING - VEHICLES WITH: STANDARD BRAKES .
  3. Refer to: BRAKE SYSTEM BLEEDING - VEHICLES WITH: HIGH PERFORMANCE BRAKES .
scientia non olet · About LEMON Manuals