LEMON Manuals: Even more car manuals for everyone
Home >> Land Rover >> 2015 >> Range Rover Autobiography >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Exhaust System - V6 S/C 3.0L Petrol -- Range Rover/L405) >> Exhaust System - V6 S/C 3.0L Petrol >> Right Catalytic Converter >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different variant/trim than selected.
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. For additional information, refer to: EXHAUST SYSTEM .

  3. G11708115

    Torque Specification: 55 Nm

  4. NOTE: Do not disassemble further if the component is removed for access only.
    G11769094

    Torque Specification: 48 Nm

    G11708117

    Torque Specification: 18 Nm

scientia non olet · About LEMON Manuals